Commercial steam generators are designed to withstand the demands of full time use in health clubs, hotels and spas. They also have additional maintenance, safety and convenience features.

In choosing a steam generator for your installation, pay close attention to the sizing and specification charts. Steam generators are selected based on the volume (in cubic feet) of the sream room. Certain additional factors affect the correct sizing of the generator: construction materials such as glass or glass block, natural marble or other stones, piping longer than 50 feet from the steam generator to the steam room, or exterior walls and outside windows.
In any of the above conditions, add about 15% to the calculation of steam room size for each condition. When in doubt, choose the next size generator, or call for guidance.

Steamroom Requirements and Recommendations

1) The steam room must be completely enclosed with non-permeable tiles or equivalent. A waterproofing membrane must be applied prior to tiling. Call with nay questions. Ph 800 426 3929
2) A special steam door should be used for heat sealing and steam containmnet.
3) Anti-skid surfaces should be added to the floor if necessary.
4) A floor drain is required.
5) Walls and ceiling must be covered with water-resistant, non-corrosive materials, such as tile, molded acrylic or fiberglass.
6) The ceiling and the seats must be sloped to allow for condensate runoff.
7) The steam room is not to be operated above 120 degrees F (49 deg. C)
8) Locate the steam generator within 50 ft of the steam room.
9) Do not locate the steam generator inside the steam room, outdoors, in an unheated space (where it could freeze), near combustible or corrosive materials (high concentrations of chlorine in a pool equipment room is an example), or in areas accessible to the general public. 10) Install the steam generator on a level surface, providing sufficient space around it for servicing. 11)Provide protection agaianst contact with hot surfaces (steam line, safety valve and drain valve)

Mr. Steam Commercial Generators

Each Mr. Steam CU Commercial Steambath untit is fully wired, factory tested, ready for installation, and fully equippped with numerous standard features that enhance its quality and durability. One reason we like Mr. Steam's commercial generators is their serviceability. They can be opened for cleaning the tank and elements.

With each steamroom serviced by a Mr. Steam generator, specify an Digi 1 Control Package, which includes temperature and steam controls, and an Digi 1 sensor and Aroma Steam steamhead.

Mr. Steam Commercial Specifications

* Call 800 426 3929 or email info@cedarbrooksauna.com for quotations. Please include delivery address.

Steamist Commercial Steam Generators

The unit includes additional safety features such as pressure control and gauge, sight glass, check and drain valve. The CP-1 control package is included to closely regulate the temperature within the steamroom. An optional 24-hour 7-day programmable timer is available to schedule the on/off operation of the unit and the Automatic Bolow-Down Assembly, which increases the life expectancy of the boiler.

 
                9/12/15/18 KW                                       24/30/36/48/60/72 kw

Steamist commercial "HC" systems are available in sizes from 9 to 72 KW.

Digital Command Center can be installed in the facility manager’s office or another remote

location for convenient programming and adjustments.

Steamist Commercial Specifications