Custom Sauna All Glass Front Wall

Dimensions of standard size shown here are for a 60" Wide and 84" high opening.

The door is 26" x 82" and the fixed two fixed panels are both 16" x 82". Consider a 30" door and a single 30" fixed panel. We recommend  that the hinges mount to the jamb side rather than the fixed glass panel.

The Eurolite design series can be custom cut to any size.The standard glass thickness is 3/8". 1/2" thick glass can be ordered if desired but this is heavier and harder on the hinge assembly.The added heat contaiment you gain with 1/2" glass is minimal.

The hardware finishes are: Chrome (standard), Brushed Nickle and oil rubbed bronze.

Provide a 60" x 84" rough opening if using the cedar jamb. These cedar jambs are 1" thick and 5 1/2" wide. If you are mounting the door and panel to a tile wall, precise finished (tile to tile) opening measurements are required for ordering these enclosures. A shop drawing will be provided to ensure that the product is correctly sized.

The hinges mount to 1" wide metal strip. This strip mounts to either a wooden jamb or tiled/slate jamb and must anchor into the wood or steel framing for adequate support. There are low profile (1/4" h outside, 3/4" h inside x 1" wide)  aluminum strikes/strips for the stops. Both have clear polycarbonate bulb seal gaskets built in. See image below for detail. The top of the door has a flexible clear sweep and the bottom has a hooded double sweep that fills the 1/2" gap at the bottom of the door. This  sweep can be omitted and the 1/2" gap can be used a s the intake vent for the sauna heater.

Click here for designer glass finishes http://www.holcam.com/glass_samples.html