Framelass glass Steam/Shower door. This shows the EL 10 Frameless steam door with the organic and warm look of tight knot cedar on the adjoining interior of a bathroom. The contrast between the dark tile in the steam room and the natural cedar tongue and groove play off themselves for a pleasing effect. The white trim adds to the drama. Door size shown here is a finished opening of 26" x 82".
The Eurolite design series can be custom cut to any size. We can help design your steam room enclosure, have the door and panels manufactured and shipped direct to your home or jobsite. The standard glass thickness is 3/8" and works for all enclosures. For heavy use commercial steam rooms, 1/2" thick glass can be ordered.
The watertight system provides full steam containment! This keeps the unwanted moisture out of the adjoining space. The hardware finishes are: Chrome, Brushed Nickle and oil rubbed bronze.
Precise finished opening measurements are required for ordering these enclosures. A shop drawing will be produced form the manufacturer. This will require the customers signature before glass manufacturing can begin. This porcess ensures a watertight fit for the door and panels.
The hinges mount to 1" wide metal strip. This strip mounts to the tiled/slate jamb and must anchor into the wood or steel framing for adequate support. There is a thin metal strips for the stop. Both have clear polycarbonate bulb seal gaskets built in. See image below for detail. The top of the door has a flexible clear sweep and the bottom has a hooded double sweep that deflects moisture into the steam room as the drips/condensation run down the glass.
Note: The glass comes 3/4" smaller in both width and height than the size of the finished opening.
Click here for designer glass finishes See the bronze and grey options
Custom orders allow 3-4 weeks for delivery. Call (800) 426 3929 or via Email for quotation on products and shipping.
* Custom etched glass patterns are available.