All glass Sauna wall.
If clean lines and maximum visibility is your goal, the all glass front wall for the steam or sauna room is the answer. Eurolite EL-10 design series includes an operable transom, and can be custom-cut to any size. Through our years of experience we have discovered that these all glass walls actually have a negligible heat loss. We provide a back to back wooden D handle for the door so the handle is not to hot to handle!
Dimensions of standard size shown here are 74" W and 80" H. Consist of a frameless 3/8" thick glass steam room door, one fixed panel and operable transom above the door. These form the entire front wall for your tiled steam room or sauna. Watertight seals all around. The standard glass thickness is 3/8" and works for all residential enclosures. For commercial sauna or steam rooms with larger glass, ½" thick glass can be ordered.
We can help design your steam room enclosure or sauna room front wall. We will fabricate the door and panels and ship them direct to your home or jobsite. Precise finished opening measurements are required for ordering these enclosures. This process ensures a watertight fit for the door and panels.
The Eurolite design series can be custom cut to any size. We can help design your steam room enclosure, have the door and panels manufactured and shipped direct to your home or jobsite. The standard glass thickness is 3/8" and works for all residential enclosures. 1/2" thick glass can be ordered if desired.
The watertight system provides full steam containment! This keeps the unwanted moisture out of the adjoining space. The hardware finishes are: Chrome, Brushed Nickle and oil rubbed bronze.
Precise finished (tile to tile) opening measurements are required for ordering these enclosures. A shop drawing will be produced from the manufacturer. This will require the customer's signature before glass manufacturing can begin. This process ensures a watertight fit for the door and panels.
The hinges mount to 1" wide metal strip. This strip mounts to the tiled/slate jamb and must anchor into the wood or steel framing for adequate support. There are low profile (1/4" h outside, 3/4" h inside x 1" wide) aluminum strikes/strips for the stops. Both have clear polycarbonate bulb seal gaskets built in. See image below for detail. The top of the door has a flexible clear sweep and the bottom has a hooded double sweep that deflects moisture into the steam room as the drips/condensation run down the glass.
Custom orders allow 3-4 weeks for delivery.
There have been no reviews
Only registered customers are allowed to add review. Please sign in and add your own review!