Harvia Cilindro 8 kW Sauna Heater

Includes Stones, power box and Xenio CX30-U1-U3 Controls. The control can located inside the sauna at 36"-42" off the floor, or outside the sauna. The power box must always be installed upright and vertical. It can not be exposed to wet/freezing conditions and nees to be wall mounted not recessed. Knock outs for electrical are on the bottom or the back.

• Xenio control dimensions are 3 1/4" wide x 4 1/4" tall. Comes with a surface mounting plate. Relay Box Dimensions are 10 1/2" W x 14 1/2" H
• Xenio controls have a 1-8 hr preset function and a 60 minute run time
• Heats min/max 200 / 431 cu. ft. 
• Harvia Cilindro 8 KW, 240V-1PH, 33.4 AMPS
• Requires a 40 AMP breaker
• Sensor wire can be extended to up to 50 Ft by crimping or soldering on additional 18 gauge 4 conductor wire.
• The control data cable wire included is 16 ft, this can be extended. See the 10 meter extension wire option (coupler on one end included) in the drop down menu.

* 200 Lbs of sauna stone!!!! Ships common carrier only.