Harvia Cilindro 9kW Sauna Heater

Harvia Cilindro steel electric sauna heater's massive sauna stone capacity provides optimal heat in a medium to larger sauna rooms.  The outer casing enables the heater to be located closer to the benching, providing more freedom for creativity in sauna design.

Includes Stones, power box and Xenio CX30-U1-U3 Controls. The control can located inside the sauna at 36"-42" off the floor, or outside the sauna. The power box must always be installed upright and vertical. It can not be exposed to wet/freezing conditions and nees to be wall mounted not recessed. Knock outs for electrical are on the bottom or the back.

Xenio control dimensions are 3 1/4" wide x 4 1/4" tall. Comes with a surface mounting plate. Relay Box Dimensions are 10 1/2" W x 14 1/2" H

Sensor wire can be extended to up to 50 Ft by crimping or soldering on additional 18 gauge 4 conductor wire.

The control data cable wire included is 16 ft, this can be extended. See the 10 meter extension wire option (coupler on one end included) in the drop down menu.

Heats 280 - 490 cu. ft. 

Harvia Cilindro H 9 KW, 240V-1PH, 37.5 AMPS

* 200 Lbs of sauna stone!!!! Ships common carrier only.