VICO Gas-fired Sauna Heaters LP or Propane
- High quality stainless steel construction
- Sealed combustion engineered specifically for the sauna environment.
- Standard pilot light or piezo style ignition
- Available with draft hood or Flue cap
- Recessed control with 60 minute timer and thermostat
- Sauna stone included
- Safety shut-off gas valve and pilot generator
- Intake air source for combustion required
- 1/2" Galvanized pipe for the gas supply line
- Extension kit is required for walls thicker than 5 1/2"
- Heater dimensions 28" H X 18 1/2" inches in diameter
- 7" Of clearance to wood required on the sides and front
- 75 Lbs of sauna stone included
There are several details that need to be provided when ordering these sauna heaters. See the download Manuals section for the order form.
- Indicate elevation
- Natural gas or propane
- Wall construction detail
- Wall thickness
- Weather you are venting directly through the wall or if you need to go up with a flue and then out
* See the the order form in the Dowload Manuals section
* Note: If the the heater does not back an exterior wall, additional venting is required. This pipe can be 4" diameter standard B vent aluminum pipe and can vent naturally with a minimum rise of at least 1/4 per ft. Long runs for the vent pipe with many turns can require complex additional air pumping systems. These are not provided by Cedarbrook or the Manufacturer.
* Allow 4-6 weeks from time of order to delivery.